google
Ar 15 Magpul Stock Removal: A Comprehensive Guide
Are you looking to customize your AR-15 rifle with a Magpul stock removal? If so, you’ve come to the right place. This guide will walk you through the process of removing the factory stock and installing a Magpul stock, providing you with a more comfortable and customizable shooting experience.
Understanding the Magpul Stock
The Magpul stock is a popular choice among shooters for its durability, adjustability, and comfort. It offers a variety of features that can enhance your shooting experience, such as adjustable cheek risers, a QD swivel cup, and a rubberized grip. Before you begin the stock removal process, it’s important to understand the features and benefits of the Magpul stock.
| Feature | Description |
|---|---|
| Adjustable Cheek Riser | Allows you to customize the cheek height for a more comfortable shooting position. |
| QD Swivel Cup | Enables quick detachment of the stock for easy transport or storage. |
| Rubberized Grip | Improves grip and reduces slippage during shooting. |
Tools and Materials Needed
Before you start the stock removal process, gather the following tools and materials:
- AR-15 rifle with factory stock
- Magpul stock
- Hex wrench set
- AR-15 cleaning rod
- Clamp or vise
- Gun oil or lubricant
Step-by-Step Stock Removal Process
Now that you have all the necessary tools and materials, let’s go through the stock removal process step by step:
-
Unscrew the factory stock from the rifle. Use the hex wrench to remove the two screws securing the stock to the receiver.
-
Remove the factory stock by pulling it straight back. Be sure to support the rifle’s receiver to prevent damage.
-
Inspect the receiver for any debris or dirt. Clean the receiver with an AR-15 cleaning rod and gun oil.
-
Attach the Magpul stock to the rifle. Line up the stock with the receiver and insert the two screws into the stock’s mounting holes.
-
Secure the screws with the hex wrench. Tighten them until the stock is firmly attached to the receiver.
-
Adjust the Magpul stock to your preferred position. Use the adjustable cheek riser and QD swivel cup to customize your shooting experience.
-
Test the rifle to ensure the stock is securely attached and functioning properly.
Common Issues and Solutions
While the stock removal process is generally straightforward, you may encounter some issues along the way. Here are some common problems and their solutions:
-
Screw stripped: If a screw becomes stripped during removal, use a screw extractor to remove it. Be sure to replace the screw with a new one.
-
Stock not aligning: If the stock doesn’t align with the receiver, check for debris or dirt in the mounting holes. Clean the receiver and try again.
-
Stock not securing: If the stock is loose, ensure that the screws are tight and that the stock is properly aligned with the receiver.
Conclusion
Removing the factory stock and installing a Magpul stock on your AR-15 can significantly improve your shooting experience. By following this guide, you can easily customize your rifle to fit your preferences and enhance your accuracy. Remember to take your time and be patient throughout the process, and don’t hesitate to seek assistance if needed.
