How to Zero a Burris AR 322 Scope

Zeroing a scope is a crucial step in ensuring that your firearm is properly sighted in. Whether you’re a seasoned hunter or a new shooter, understanding how to zero a Burris AR 322 scope is essential for accuracy. In this detailed guide, we’ll walk you through the process step by step, ensuring that you achieve a precise zero for your firearm.

Understanding the Burris AR 322 Scope

The Burris AR 322 scope is a popular choice among shooters for its durability, clarity, and ease of use. Before we dive into the zeroing process, let’s familiarize ourselves with the key components of the scope:

• Objective Lens: The front lens of the scope, which collects light and provides a clear image.
• Eye Piece: The rear lens of the scope, which you look through to view the target.
• Reticle: The aiming point in the scope, which can be adjusted for windage and elevation.
• Adjustment Turrets: The dials on the side of the scope that allow you to make precise adjustments to the reticle.

Now that we have a basic understanding of the scope, let’s move on to the zeroing process.

Preparation

Before you begin, make sure you have the following items:

• Your firearm and Burris AR 322 scope
• Ammunition suitable for your firearm
• A target with a bullseye
• A shooting rest or a stable surface to support your firearm
• A tape measure or a rangefinder

Ensure that your firearm is unloaded and pointed in a safe direction before you begin.

Setting Up the Shooting Position

Find a suitable location for shooting, such as a shooting range or a safe outdoor area. Place your target at a distance that is comfortable for you to shoot at, typically between 25 and 100 yards. Set up your shooting rest or find a stable surface to support your firearm, ensuring that it is level and secure.

Adjusting the Turrets

Before you begin shooting, adjust the turrets on your scope to the zero setting. This is typically done by turning the turrets until the reticle is centered on the target. The zero setting will vary depending on your firearm and ammunition, so consult your firearm’s manual or a reloading manual for the appropriate zero setting.

Shooting and Adjusting

Load your firearm with ammunition and take aim at the bullseye on your target. Fire a few shots, then step back and inspect the group of shots on the target. If the shots are low, turn the elevation adjustment turret up. If the shots are high, turn the elevation adjustment turret down. If the shots are to the left, turn the windage adjustment turret to the right, and vice versa.

Repeat this process, shooting and adjusting until your shots are consistently grouping in the center of the bullseye. It may take several rounds of shooting and adjusting to achieve a precise zero.

Verifying the Zero

Once you have achieved a zero, it’s important to verify it. Load your firearm with a known distance bullet, such as a 100-yard bullet, and shoot at the target. If the bullet lands in the center of the bullseye at 100 yards, your zero is accurate. If not, make further adjustments to the turrets as needed.

Maintenance and Storage

After you have zeroed your Burris AR 322 scope, it’s important to maintain it properly. Keep the scope clean and dry, and store it in a cool, dry place. Periodically check the turrets and the reticle for any signs of wear or damage, and make any necessary adjustments.

By following these steps, you can achieve a precise zero for your Burris AR 322 scope and ensure that your firearm is ready for any shooting situation.